Vernon Motorsports Motorcycle Cleaning

Frequent cleaning of your machine will enhance its appearance, maintain good overall performance, and extend the life of many components.

• Before washing the machine, block off the end of the exhaust pipe to prevent water from entering. A plastic bag secured with a rubber band may be used for this purpose.
• If the engine is excessively greasy, apply some degreaser to it with a paintbrush. Do not apply degreaser to the chain, sprockets, or wheel axles.
• Rinse the dirt and degreaser off with a garden hose; only use enough pressure to do the job.
• After the majority of the dirt has been hosed off, wash all surfaces with warm water and a mild detergent. Use an old toothbrush to clean hard-to-reach places.
• Rinse the machine off immediately with clean water, and dry all surfaces with a soft towel or cloth.
• Immediately after washing, remove excess water from the chain with a paper towel and lubricate the chain to prevent rust.
• Clean the seat with vinyl upholstery cleaner to keep the cover pliable and glossy.
• An automotive wax may be applied to all painted or chromed surfaces. Avoid combination cleaner-waxes, as they may contain abrasives.
• After completing the above, start the engine and allow it to idle for several minutes.
• Note: Excessive hose pressure may cause water seepage and contamination of wheel bearings, front forks, brakes and transmission seals. Many expensive repair bills have resulted from improper high-pressure detergent applications such as those available in coin-operated car washes.